XTZ Divine 100.49 User Manual page 14

Basic setting for
neutral bass
reproduction
Level adjustment
Since the acoustics is determined by a wide range
of external factors there exists no single neutral
setting that will work properly for all cases.
External factors that have influence on the sound
include the room, the placing, output levels etc.
Tweeter:
Mode 1/ 0dB
In this mode the sound is neutral with a
flat frequency response.
Mode 2/ +3dB
In this mode the treble level is increase by 3dB.
Midrange:
Mode 1/ -2dB
In this mode the midrange level is decreased by
2dB.
Mode 2/ 0dB
In this mode the sound is neutral with a
flat frequency response.
Woofer:
Mode 1/ 0dB
In this mode the sound is neutral with a
flat frequency response.
Mode 2/ +3dB
In this mode the bass level is increase by 3dB.
14 (16)
Bass level set at mode 2 (0dB)
Midrange level set at mode 2 (0dB)
Treble level set at mode 1 (0dB)
2 bass plugs in the bass ports
The levels can be adjusted with the
jumpers.