Table of Contents
Advertisement
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a
non-PoE switch.
IMPORTANT:
Although the camera and the cable gland on the camera's end are waterproof, the cable
molding at the other end is not waterproof.
Measures should be taken to prevent water from leaking in through the cable-end molding,
such as the use of expanding foam sealant, putties, and so on. Note that the cable gland
on the camera should also be securely fastened to attain its waterproof functionality.
Waterproof
EN - 6
PoE Power Injector
(optional)
Non-PoE Switch
Not Waterproof
Cable Molding
Advertisement
Table of Contents
