Application Diagram - TRENDnet TPE-1020WS User Manual

TRENDnet User's Guide
Amber : PoE port has may have one of the following issues:

PoE power circuit shortage.

Power over current: over the power current of PD's
classification.

Out of PoE voltage of 44 ~ 57 VDC output.

Cause fail.
Off No PoE powered device (PD) connected or unplugged the
PoE output port.

Gigabit Ports (9R-10R)

L/A: Link/Activity
On : When the Link/ACT LED lights on, the respective port is
successfully connected to an Ethernet network.
Blinking : When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet network.
Off : No link.

SPD:Speed
Green : When the Green LED lights on, the respective port is
on connected to a 1000Mbps Gigabit Ethernet network.
: When the respective port is connected to a 10Mbps or
Amber
on 100Mbps Ethernet network

SFP Slots Shared (9-10)

SFP
Green on : When the mini-GBIC Green LED lights on, the
respective port is inserted mini-GBIC Gigabit
module.
Green blinking : When the mini-GBIC Green LED is blinking, the
port is transmitting or receiving data on the
Gigabit network.
Amber on When the mini-GBIC Amber LED lights on, the
respective port is inserted mini-GBIC 100Mbps
module.
Amber blinking When the mini-GBIC Amber LED is blinking, the
port is transmitting or receiving data on the
Ethernet network.
Off No link
© Copyright 2015 TRENDnet. All Rights Reserved.

Application Diagram

The PoE WebSmart switch is installed a server room with
The PoE switch supplying power and providing data connectivity to through Ethernet to PoE
devices (access point and IP camera). The PoE connects the PoE devices to your network through
the non-PoE Gigabit Ethernet uplink port to a switch that is connected to your network..
TPE-1020WS
in an EIA standard-size, 19-inch rack
3