GE ZIDI240PII, ZIDI240WII Installation Instructions Manual page 4

REMOUNT LOWER DRAWER DOOR
8
A Position the door so that the flange is positioned
above the bottom of the drawer and the top two
loosened screws are lined up with the slotted
screw holes.
Install the door onto the two screws.
B
Flange
Installation Instructions
4
REMOUNT LOWER DRAWER DOOR (cont.)
8
Rotate the top of the door forward until the
C
flange drops below the bottom of the drawer.
D Use a Phillips-head screwdriver to screw the bottom
four screws into the door and tighten the top two
screws.
LEFTOVER PARTS
The following parts will be left over after the installation
of the kit:
Bottom Trim Covers (2)
Screws (6)
Flange
Trim Panels (2)
(if applicable)