Table of Contents
Advertisement
Available languages
Available languages
MOUNT FOAM PAD TO UPPER DRAWER
2
A
Slowly peel off the adhesive backing from the
foam pad.
B
Center the foam pad on the front face of the
drawer with the adhesive side facing the drawer.
Position the top surface of the pad against the
C
top trim cover.
NOTE: Refer to illustration for correct placement.
INSTALL DOOR PANEL ON TOP DRAWER
3
Peel clear protective lining from door panel.
A
Hook the lip of the door panel over the edge of
B
the top trim cover.
Rotate the bottom of the door panel under the
C
bottom trim cover until the door panel is fully
seated.
Installation Instructions
2
INSTALL DOOR PANEL ON TOP
3
DRAWER (cont.)
Using three of the provided screws, attach the
D
bottom of the door panel to the bottom of the door.
NOTE: Press on door panel to align screw holes.
CAUTION:
sharp edges.
REMOVE LOWER DRAWER DOOR
4
Open the lower drawer and use a Phillips-head
A
screwdriver to remove the bottom two screws
from each side.
Use a Phillips-head screwdriver to loosen the
B
top two screws ¼" from the door.
Remove the door by pulling upward and outward.
C
Door panel may have
Advertisement
Table of Contents
