Miele ESW 6114 Operating And Installation Instructions page 35

Cleaning the drawer front and
interior
The On/Off sensor must be kept
clean. Soiling and liquid on the sensor
could cause it to fail to react or to
switch the appliance on or off uninten‐
tionally.
 Remove all soiling using a solution of
hot water and washing-up liquid ap‐
plied with a sponge or use a clean,
damp mircofibre cloth.
 Wipe with clean water afterwards.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning and care
Cleaning the anti-slip mat
Do not clean the anti-slip mat in the
dishwasher or washing machine.
Never place it in the oven to dry.
 Remove the anti-slip mat for clean‐
ing.
 Clean the anti-slip mat by hand only
using a solution of hot water and mild
washing-up liquid. After cleaning, dry
with a cloth.
 Only replace the anti-slip mat when it
is completely dry.
35