Local Management - TP-Link archer c50 User Manual

Chapter 12
2. Go to Advanced > System Tools
Management section.
3. Enter the old username and old password. Enter the new username and enter the
new password twice (both case-sensitive). Click Save.
Use the new username and password for the following logins.

12. 6. Local Management

This feature allows you to limit the number of client devices on your LAN from accessing
the router using the MAC address-based authentication.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
Management section according to your needs.
3. Keep the Port as the default setting. Enter the IP address or MAC address of the local
device to manage the router.
Note:
1. The IP address of the local device must be in the same subnet as the router's LAN IP address.
2. If you want that all local devices can manage the router, just leave the
4. Click Save to make the settings effective. Now only the device using the IP address or
MAC address you set can manage the router.
> Administration
System Tools > Administration
and complete the settings in
and complete the settings In
IP/MAC Address field blank.
Account
Local
85