Use Wps For Wireless Connection - TP-Link archer c50 User Manual

Chapter 11
2. Select the wireless network
3. Select an option from the
options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise
and WEP. We recommend you don't change the default settings unless necessary.
If you select other options, configure the related parameters according to the help
page.
In addition
• Mode - Select a transmission mode according to your wireless client devices.
802.11b/g/n mixed,
mixed, 802.11n/ac mixed
it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
• Transmit Power - Select either High,
The default and recommended setting is High.

11. 7. Use WPS for Wireless Connection

Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-
protected Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2.4GHz or 5GHz.
Security dropdown list. The router provides four security
802.11g/n mixed or
or 802.11ac only
Middle
802.11n only for 2.4GHz; and
for 5GHz. It is recommended to just leave
or Low to specify the data transmit power.
802.11a/n/ac
75