Specify Wireless Settings - TP-Link archer c50 User Manual

Chapter 11
Done!

11. 6. Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the product label. You
can customize the wireless settings according to your needs.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Basic > Wireless.
with the router's IP which sends out the data. In the example, the
data packets will be sent to the LAN port of Router 2 and then to
the Server, so the default gateway should be 192.168.0.2.
Interface: Determined by the port (WAN/LAN) that sends out
the data packets. In the example, the data is sent to the gateway
through the LAN port, so LAN should be selected.
Status: Determines the status of the entry. In the example,
Enabled should be selected.
6. Click OK to save the settings.
7. Check the System Routing Table
entry you set in the
is set successfully.
Open a web browser on your PC. Enter the company server's IP
address to visit the company network.
below. If you can find the
System Routing Table, the static routing
73