Cleaning The Air Filter - Sony VPL-FE40/FE40L Operating Instructions Manual

Cleaning the Air
Filter
The air filter should be cleaned whenever
you replace the lamp.
Remove the air filter, and then remove the
dust with a vacuum cleaner.
The time needed to clean the air filter will
vary depending on the environment or how
the projector is used.
1
Turn the power off and unplug the
power cord.
2
Remove the air filter covers.
The air filter of the VPL-FX41 is on one
side only.
3
Remove the air filter from the each
claws (6 positions) on the air filter
cover.
4
Clean the air filter with a vacuum
cleaner.
5
Caution
If you neglect to clean the air filter, dust may
accumulate, clogging it. As a result, the
temperature may rise inside the unit,
leading to a possible malfunction or fire.
Notes
• If the dust cannot be removed from the air
• Be sure to attach the air filter cover firmly;
• The air filter has face and reverse sides.
• To erase a message, press any key on the
Claws
Attach the air filter so that it fits into
the each claws (6 positions) on the air
filter covers and replace the cover.
filter, replace the air filter with a new one.
For details on new air filter, consult with
qualified Sony personnnel.
the power can not be turned on if it is not
closed securely.
Attach the air filter so that the frames on the
air filter are visible.
control panel of the projector or on the
remote commander.

Cleaning the Air Filter

43