Sony VPL-FE40/FE40L Operating Instructions Manual page 18

For details, refer to the operating
instructions supplied with your computer.
Note
To connect a Macintosh computer equipped
with a video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
To connect a computer (Digital) or
video equipment (Digital)
Side
to DVI-D output
connector
to HDMI connector
A HDMI-DVI-D cable (not supplied)
B HDMI cable (not supplied)
Note
Be sure to use the HDMI cable with an HDMI
logo.
18
Connecting the Projector
The HDMI connector of this projector is not
compatible with DSD (Direct Stream
Digital) Signal or CEC (Consumer
Electronics control) Signal.
To attach the HDMI cable
Fix the cable to the cable tie holder next to
the HDMI cable using a commercially
available cable tie as in the illustration.
Computer
DVD player
Cable holder
Cable tie (commercially available)
*
Use a cable tie of less than 1.9 mm
mm thickness.
H D M I
×
3.8