Connecting A Vcr - Sony VPL-FE40/FE40L Operating Instructions Manual

Connecting a VCR

This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
Side
to audio
output (L)
to S
video to video
output output
VCR
A Audio connecting cable (not supplied)
For stereo equipment use both the L and R
jacks.
For monaural equipment use the L (MONO)
jack only.
B Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output connector
Side
to video
component
output
to audio
A Stereo audio connecting cable (not supplied)
output
(Use a no-resistance cable.)
(R)
B BNC cable (not supplied)
Note
Set the aspect ratio using "Aspect" on the
Screen menu according to the input signal.
to
audio
output
(L)
GBR/
VCR
Connecting the Projector
to
audio
output
(R)
19