Sony VPL-FE40/FE40L Operating Instructions Manual page 21

For details, see "Auto Input Search"
in the Function menu on page 35.
• The Smart APA feature is effective for
the input (analog) signal from a
computer only.
(It is not effective for digital computer
signal.)
5
Switch the equipment connected to
output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
/ /
LCD ,
VGA
your computer's settings.
F7 Fx
or
and
Fn
Note
The key used for switching the computer to
output to the projector varies depending on
the type of computer.
6
Adjust the upper, lower, left or right
position of the picture using the M/m/
</, key while pressing the SHIFT
key.
7
Adjust the size of the picture and the
focus.
Press the FOCUS key and adjust the
focus using the M/m/</, keys.
Press the ZOOM key and adjust the size
of the picture using the M/m/</,
keys.
Note
The VPLL-1008 does not have the zoom
function. To adjust the focus of the picture,
turn the lens ring.
, etc.), or by changing
To adjust the tilt of the installation
surface
If the projector is installed on an uneven
surface, use the adjusters to keep the
projector level.
Notes
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjuster extended.
It may cause a malfunction.
Turn to
adjust
Adjusters
21
Projecting