Table of Contents
Advertisement
The Screen Menu
The Screen menu is used to adjust the input signal. You can also adjust the aspect ratio of the
picture.
Items that can be adjusted or set depend on the kind of input signals.
For details, see "Input signals and adjustable/setting items" on page 39.
Aspect
Full 2
Over Scan
On
Adjust Signal
Setting items
Functions
Aspect (When the
You can set the aspect ratio of the picture to be
video signal is
displayed for the current input signal. This item is
input)
enabled only when an video signal (preset memory
numbers 1 to 15) is input.
• 4:3 : Select to view a picture with normal 4:3 aspect
• 16:9 : Select to view a picture squeezed.
• Zoom: Select to view a squeezed picture with black
Aspect (When the
You can set the aspect ratio of the picture to be
PC signal is input)
displayed for the current input signal. This item is
enabled only when an PC signal (preset memory
numbers 21 to 56) is input.
• Full 1: Displays a picture vertically or horizontally to
• Full 2: Displays a picture on the whole of the screen.
• Normal: Displays the picture while matching one
• 4:3: Makes the aspect ratio 4:3.
• 16:9: Makes the aspect ratio 16:9.
Over Scan
Hides the outline of the picture.
• On: Hides the outline of the input picture. Select this
• Off: Projects the whole of the input picture.
ratio.
bands displayed on both sides.
fill the screen without changing the aspect ratio of the
original picture.
pixel of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
setting when noise appears along the edge of the
picture.
To adjust the displayable area within the four
directions of the screen, refer to "Blanking" in the
Installation menu (page 38)
Initial setting
Set according to
the input signal
Set according to
the input signal
On
31
The Screen Menu
Advertisement
Table of Contents
