Using The On-Screen Display (Osd) Controls - Lenovo thinkvision x1 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
Adjusts overall screen Brightness/Contrast/DCR
Exit
To use the controls:
1. Press
2. Use or
function. If there is a sub-menu, you can move between options using
then press
to save.
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
shows on the screen.
to open the main OSD menu.
to move among the icons. Select an icon and press
to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
OK
or to make adjustments. Press
for 10 seconds to unlock the OSD and
to access that
or ,
for 10
2-4
Chapter 2.