Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo thinkvision x1 User Manual

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon Control
Microphone
Mute/Un-mute
Control
1
DDC-CI
Exit
Speaker mute
control
2
Decrease/Left
Brightness
3
Increase/Up
Menu
4
Enter
USB switch
5
button
Volume
6
Up/Down
Description
Turn on/off the integrated microphones
Press and hold for 10 seconds to enable or disable
the DDC-CI function
Exit from menu
Turn on/off the speaker
Left browsing key
For decreasing the value on adjustment bar/tune
inPress to move to last item
Direct access to Brightness adjustment
Right browsing key
For increasing the value on adjustment bar/tune in
Press to move to next item
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/un-
lock menu
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar
Switch USB mode between 2.0 and 3.0 in USB Type-
C source
Press to control Speaker Volume up/down
2-3
Chapter 2.