Table of Contents
Advertisement
10. Insert the DC output connector from the external power supply into the power connector
of the monitor and connect the power cord into the external power adapter. Plug the power
cord from the monitor external power supply and the power cord from the system into
grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to
IEC 60227 (designation H05VV-F 3G 0.75mm
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm
11. Assembled line cleaner as shown below.
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
2
) shall be
1-10
Chapter 1.
Hide quick links:
Advertisement
Table of Contents
