Security Level; Set Up Security Level; Security Code - Nokia XPRESS-ON 3125 User Manual

If your wireless service providers
supports this feature, then you can
restrict the calls your phone can
make and receive. When calls are
restricted, calls still may be possible
to the official emergency number
programmed into your phone.
Note: Contact your service
provider for the restriction
password.
1. At the standby mode, select
Menu > Settings
settings > Call
2. Enter the security code and press
OK. (See

Security code, 57

more information.)
3. Select the type of calls you wish
to restrict:
Restrict outgoing
cannot be made.
Restrict incoming
cannot be received.
4. Scroll to an option (Select,
restriction, Edit, or Delete), and
press Select.

Security level

The security level determines your
access to features when a "non-
owner" UIM card is used. A "non-
owner" UIM card is one (other than
the original) that is inserted after
you power off the phone.
> Security
restrictions.
for
calls—Calls
calls—Calls
Add
Copyright © 2004 Nokia. All rights reserved.
S e t t i n g s ( M e n u 5 )

Set up security level

1. At the standby screen, select
Menu > Settings
settings > Security
press Select.
2. Enter the security code and press
OK.
3. Scroll to Off, Memory, or
and press Select.
Off—Owner and Non-owner
cards are treated the same.
Memory—Non-owner cards can
access UIM memory. Any
changes to the memory setting
requires the security code. The
owner card has access to all
features, but the security code is
required to change a memory
setting
Phone—The security code is
required upon power-up.
4. A message appears in the display
confirming your selection.
Security code
Note:Avoid using codes
similar to emergency
numbers such as 911 to
prevent accidental dialling of
the emergency number.
The security code controls access to
security features in the
settings menu. The preset code is
12345. Once you change the
security code, keep the new code
> Security
level, and
Phone
Security
57