Make Calls; Receive Data Or Fax Calls - Nokia XPRESS-ON 3125 User Manual

Note: Contact your calling
card company for more
information.

Make calls

After you have saved your calling
card information in your phone, you
can make a call using your calling
card.
1. At the standby mode, select
Menu > Settings
Calling card.
2. Enter your security code, and
press OK. (See Security code, 57
for more information.)
3. Scroll to the calling card of your
choice, select Options
OK.
4. Press the End key to return to the
standby mode; then enter the
phone number, including any
prefix (such as 0 or 1) that your
calling card may require when
you make a calling card call.
See your calling card for
instructions.
5. Press and hold the Talk key for a
few seconds until
displayed.
6. When you hear the tone or
system message, press OK.
> Call settings >
> Select >
Card call is
Copyright © 2004 Nokia. All rights reserved.
S e t t i n g s ( M e n u 5 )

Receive data or fax calls

Data or fax calls is a network service.
See Network services, ix
information.
If your wireless service provider
supports this feature, you can set up
the phone to send or receive data or
fax calls when a terminal, such as a
PDA or PC, is connected.
For better performance during data
calls, place the phone on a
stationary surface. Do not move the
phone by holding it in your hand
during a data call.
Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
http://www.nokia-
asia.com/.
1. At the standby mode, select
Menu > Settings
Data/fax calls >
fax call > Normal,
or Fax calls only.
Normal—The phone receives
incoming calls as usual.
Data calls only—The phone
receives only data calls.
Fax calls only—The phone
receives only fax calls.
2. When you are finished receiving
the fax or data call, repeat step 1
and select Normal.
for more
> Call settings >
Incoming data/
Data calls only,
49