Pin Code Request; Call Restrictions; Security Level - Nokia 6265 User Manual

9244301_6265_2_en_in_tat.fm Page 75 Tuesday, April 25, 2006 4:44 PM

PIN code request

To provide extra security in case your
phone is lost or stolen, enable your
phone to request the PIN code when
powered on.
1. In standby mode, select
Settings > Security >
request.
2. Enter the PIN code, and select OK.
3. Select On.

Call restrictions

Select call restrictions to block or allow
numbers for incoming and outgoing
calls. With any numbers entered as
allowed numbers, all those entered as
blocked numbers are ignored. With a
number blocked, the phone blocks any
call from it, and send the caller to the
voice mail.
1. In standby mode, select
Settings > Security >
restrictions.
2. Enter the security code, and select
OK. See "Security", p. 74.
3. Select the types of calls you want
to restrict:
Restrict outgoing calls—Set
restrictions on making calls.
Restrict incoming calls—Set
restrictions on receiving calls.
4. Select whether to block or allow
numbers:
Blocked numbers—Set the numbers
the phone can only block, allowing
all the rest.
Allowed numbers—Set the numbers
Menu >
the phone can only call or receive,
PIN code
blocking all the rest.
5. Select one of these options: Select,
Add restriction
memory full),
with no number added), or
(unavailable with no number
added).
Note: With restricted calls,
you may still call the official
emergency number
programmed into your device.

Security level

Your device can be set to different
Menu >
security levels to control device use
Call
and memory settings. In standby mode,
select Menu > Settings
Security level. Enter your security code,
and select OK and one of the following
options:
None—Disable security level
protection.
Memory—Enable or disable memory
protection.
Phone—Enable or disable phone
protection.
S e t t i n g s
(unavailable with
Edit (unavailable
Delete
> Security >
75