Personal Unblocking Key (Puk) Code; Call Restrictions; Security Level - Nokia 3125 User Manual

Personal unblocking key
(PUK) code
The PUK code is used to restore a
blocked PIN code. The PUK code is 8
characters in length and cannot be
changed. The PUK code must be
obtained from your wireless service
provider.
Important: If you enter an
incorrect PUK code 10 times
in succession, the UIM card is
rejected and can no longer be
used. You must contact your
wireless service provider for a
new UIM card.

Call restrictions

Call restriction is a network service.
See "Network services"
more information.
If your wireless service providers
supports this feature, then you can
restrict the calls your phone can
make and receive. When calls are
restricted, calls still may be possible
to the official emergency number
programmed into your phone.
Note: Contact your service
provider for the restriction
password.
1. At the standby mode, select
Menu > Settings
settings > Call restrictions.
2. Enter the security code and press
OK. (See "Security code"
64 for more information.)
on page 9 for
> Security
on page
Copyright © 2004 Nokia. All rights reserved.
3. Select the type of calls you wish
to restrict:
Restrict outgoing
cannot be made.
Restrict incoming
cannot be received.
4. Scroll to an option (Select,
restriction, Edit, or Delete), and
press Select.

Security level

The security level determines your
access to features when a "non-
owner" UIM card is used. A "non-
owner" UIM card is one (other than
the original) that is inserted after
you power off the phone.
Set up security level
1. At the standby screen, select
Menu > Settings
settings > Security
press Select.
2. Enter the security code and press
OK.
3. Scroll to None, Memory, or
and press Select.
None—Owner and Non-owner
cards are treated the same.
Memory—Non-owner cards can
access UIM memory. Any changes
to the memory setting requires
the security code. The owner card
has access to all features, but the
security code is required to
change a memory setting.
S e t t i n g s
calls—Calls
calls—Calls
Add
> Security
level, and
Phone
63