Editing; Editing With Another Vcr - Sony SLV-EZ717AS Operating Instructions Manual

Editing

Editing with another VCR

How to connect to record on this VCR
This VCR (Recorder)
LINE-2 IN
VMC-810HG audio/video cable (not supplied)
: Signal flow
How to connect to a stereo system (for SLV-EZ717AS/NZ
only)
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• (For SLV-EZ414AZ/EZ212AZ only)
Connect LINE-1 IN on this VCR to the line output jacks on the other VCR using a
commercially available audio/video cable such as Sony VMC-710HG/721HG (not
supplied). If the other VCR has the AUDIO L and R jacks, use a Sony VMC-910HG
audio/video cable (not supplied).
• (For SLV-EZ717AS/NZ only)
You can also use the LINE-1 IN jack instead. If the other VCR is a monaural type,
the sound is recorded only on the channel whose jack is connected to the audio
plug. To record on both right and left channels, connect the audio plugs to the
AUDIO R/L jacks using a VMC-910HG audio/video cable (not supplied).
Notes
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• Make sure you connect the plugs to the jacks of the same colour.
01GB07EDT-AS/NZ.p65
LINE OUT
63
TV
Other VCR (Player)
10/1/01, 11:38
SLV-EZ717_GB 3-065-578-11 (1)
63
Editing