Presetting Channels - Sony SLV-EZ717AS Operating Instructions Manual

Presetting channels

If you received only a few channels or absolutely no channels after
performing the EASY G-CODE SET UP function (page 14), preset all
receivable channels automatically using the One Touch Tuning function or
the TUNER PRESET menu.
If some channels could not be preset automatically when using the EASY
G-CODE SET UP function, One Touch Tuning function or TUNER PRESET
menu, preset them manually. If there are any unwanted channels among the
preset ones, you can disable the channels.
Presetting all receivable
channels using the One
Touch Tuning function
1
ONE TOUCH
TUNING
2
PROGRAM
ONE TOUCH
TUNING
To check if the channels are preset correctly
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the
TV screen changes to a different programme each time you press
PROGRAM +/–, the channels are preset correctly.
Tip
• To stop the One Touch Tuning function, press ONE TOUCH TUNING or x STOP
on the VCR during the setting.
16
Getting Started
01GB03GET-AS/NZ.p65
Press and hold ONE TOUCH TUNING on
the VCR for more than three seconds.
(For SLV-EZ414AZ/EZ212AZ only)
1 Press PROGRAM +/– on the VCR so that the indicator for your
country (AUS or NZ) appears in the display window.
2 Press ONE TOUCH TUNING.
The VCR starts presetting the channels.
The WAIT indicator goes off when all the receivable channels are
preset.
16
PROGRAM +/–
ONE TOUCH
TUNING
SP
APC
SP
APC
10/1/01, 11:22
SLV-EZ717_GB 3-065-578-11 (2)