Body Posture During Measurement; Taking Your Blood Pressure Reading - AEG BMG 5610 Instruction Manual

hand in a mild detergent, then rinse it thoroughly in cold water. Never dry the cuff in clothes
dryer or iron it. Clean the cuff after the usage of every 200 times is recommended.
5.

BODY POSTURE DURING MEASUREMENT

Sitting Comfortably Measurement
a. Be seated with your feet flat on the floor, and don't cross your legs.
b. Place palm upside in front of you on a flat surface such as a table.
c. The middle of the cuff should be at the level of the right atrium of the
heart.
6.

TAKING YOUR BLOOD PRESSURE READING

a. After applying the cuff and with your body in a comfortable position, press the "START" button.
A beep is heard and all display characters are shown for self-test. See Fig. 6. Please contact the
service center if a segment is missing.
b. Then the current memory bank (U1 or U2) is flashing. See Fig. 6-1. Press the "MEM" button to
change to the other bank. See Fig. 6-2. Confirm your selection by pressing the "START" button.
The current bank will also be confirmed automatically after 5 seconds with no operation.
Fig. 6 Fig. 6-1
English
Fig. 6-2
125