Table of Contents
Advertisement
Troubleshooting
Problem
The oven does not work.
The clock display flashes.
Replacing the oven
light
Method
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after-sales service:
Possible cause
Blown fuse.
Power cut
Repairs may only be carried out by fully trained
after-sales service technicians.
Improper repairs may constitute serious hazards to
the user.
If the oven light fails, it must be replaced. 40 watt
heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the glass cover by turning it anti-
clockwise.
4.
Replace the oven light with one of the same type.
5.
Screw the glass cover back on.
6.
Remove the tea towel and switch the fuse back
on.
Comments/remedy
Look in the fuse box and check that the
fuse is in working order.
Reset the time.
29
Hide quick links:
Advertisement
Table of Contents
