Cleaning Function; Cleaning The Glass Panels - Bosch HBN 4305.0 B Instruction Manual

Cleaning function

Caution
Setting procedure
When the oven has cooled
Cleaning the glass
panels
Removal
26
The cleaning function is a regeneration program. If the
self cleaning components of the oven are no longer
cleaning themselves sufficiently, they can be
regenerated using this function. They are then fully
operational again.
Remove accessories and ovenware from the oven.
Before you do this, you must clean the oven surfaces
which are not self-cleaning. Otherwise stains may
appear that cannot be removed.
1.
Set the function selector to 3D hot air T.
2.
Set the temperature selector to
3.
Press the j button until the ? symbol flashes.
4.
Use the + button to set 1.00 hour.
The setting is adopted after a few seconds.
The oven will switch off automatically after one hour.
Switch off the function selector.
Wipe away salt residues from the self cleaning
components using a moist cloth.
The glass panel on the oven door can be removed to
assist in cleaning.
1.
Remove the oven door and lay it down on a cloth
with the handle underneath.
2.
Unscrew the cover at the top of the oven door.
To do this, undo the right and left hand screws
(Fig. A)
.
clean