Take Pictures In A Sequence - Nokia N93 User Manual

change them again. To change the main settings, select
Options > Settings and from the following:
Image quality—Print 3M - Large
Print 2M - Med. (1600x1200 resolution),
Small (1280x960 resolution), or
resolution). The better the image quality, the more memory
the image consumes. If you want to print the image, select
Print 3M - Large, Print 2M -
Small. If you want to send it through e-mail, select
1.3M - Small. To send the image through MMS, select
MMS 0.3M.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select
captured image after it is taken, or
continue taking pictures right away.
Extended zoom (main camera only)—Select
(continuous) to allow the zoom increments to be smooth
and continuous between digital and extended digital zoom
or On (paused) to allow the zoom increments to pause at
the digital and extended digital step point. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Flicker cancellation—Select
(2048x1536 resolution),
Print 1.3M -
MMS 0.3M (640x480
Med., or Print 1.3M -
Print
Yes if you want to see the
No if you want to
On
50Hz or 60Hz.
Shutter tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.

Take pictures in a sequence

Sequence mode is available only in the main camera.
To set the camera to take up to six pictures in a sequence
(if enough memory available), select
mode.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer
20 seconds. To activate the self-timer, select Activate.
The self-timer indicator (
Options > Sequence
to open it.
> 2 seconds, 10 seconds, or
) blinks and the device beeps
27