Device Manager - Nokia N93 User Manual

UMTS network and wireless LAN, select
To search for wireless LANs available within range, select
Availab. WLAN.
Data connections
In the active connections view, you can see the open data
connections: data calls (
or ), and wireless LAN connections (
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select
close all open connections, select
all.
To view the details of a connection, select
Details. The details shown depend on the connection type.
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode
Ad-hoc), and signal strength indicator.
networks with encryption, and
active connection in the network.
To view the details of a network, select
92
Act. data conn..
), packet data connections (
).
Options > Disconnect. To
Options > Disconnect
Options >
(Infrastructure
is shown for
if your device has an
Options > Details.
Create an Internet access point
1 Press , and select
Availab. WLAN.
2
The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
Internet access point, and select
access point.
3 The device creates an Internet access point with default
settings. To view or change these settings, see 'Access
points', p. 106.

Device manager

Press , and select
receive server profiles and different configuration settings
from your service provider, or company information
management department. These configuration settings
may include access point settings for data connections and
other settings used by different applications in your device.
To connect to a server and receive configuration settings
or
for your device, scroll to a profile, and select
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select
Disable config..
Connect. > Conn. mgr.
Options > Define
Connect. > Dev. mgr.. You may
Options
Options > Enable config.
>
>
or