Table of Contents
Advertisement
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See 'Pair devices', p. 86. Activate the remote
SIM mode from the other device.
When the remote SIM mode is on in your Nokia device,
Remote SIM
is displayed in the standby mode. The
connection to the wireless network is turned off, as
indicated by
in the signal strength indicator area, and
you cannot use SIM card services or features requiring
cellular network coverage. However, a wireless LAN
connection remains active during the remote SIM mode.
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except make
calls to certain emergency numbers, or use other
features that require network coverage. To make calls,
you must first exit the remote SIM mode. If the device
has been locked, enter the lock code.
To exit the remote SIM mode, press
rem. SIM
mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth
this way, you can better control who can find your device
with Bluetooth wireless technology, and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
Bluetooth connectivity indicators
• When
connectivity is on.
• When
with another device.
• When
transmitted using Bluetooth connectivity.
1
Open the application where the item you want to send
, and select
Exit
is stored. For example, to send an image to another
compatible device, open Gallery.
>
Off
or
My phone's visibility
is shown in the standby mode, Bluetooth
is blinking, your device is trying to connect
is shown continuously, data is being
> Hidden. In
85
Advertisement
Table of Contents
