Table of Contents
Advertisement
Answer if fold
opened—Select
If fold
closed—Select
End call
Call settings
Send my caller
ID—Select
Yes
be seen or hidden from the person you are calling.
Otherwise, the value may be set by your service provider
when you subscribe to the network service.
network
is displayed.
Call
waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. To check whether the
function is active, select
Check
on or off, select
Activate
or Cancel.
Reject call with
SMS—Select
to a caller informing why you could not answer the call.
See 'Answer or reject a call', p. 63.
Message
text—Write text to be sent in a text message
when you reject a call.
Image in video
call—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
No
or Yes.
or
Activate
loudspeaker.
or
No
to set your phone to
Set by
status. To set the function
Yes
to send a text message
Automatic
redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
.
Summary after
call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed
dialling—Select On, and the numbers assigned to
the speed dialing keys (
pressing and holding the key. See also 'Speed dial a phone
number', p. 58.
Anykey
answer—Select On. To answer an incoming call
briefly press any keypad key, except
.
Line in
use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
–
) can be dialed by
,
,
, and
105
Advertisement
Table of Contents
