Selecting Channels; Nicam Broadcast Selection; Igr (German Stereo System )Broadcasts - NEC NLT-15C User Manual

OPERATIONS(TV)
Selecting channel
Using digit buttons to directly access channels
1. To select a one-digit channel: Input the channel number using the 0-9 number button directly
2. To select Two -digit channel numbers:Press -/-- to display - - ,then input the channel number.
3. To select Three -digit channel numbers: Press -/-- to display 1- -, then input the channel
number.
Note:
1. The maximum channel number is 199.
2. Be sure to enter the channel number within 3 seconds.
3. When you use the number buttons, you may directly select channels that were erased.

NICAM Broadcast Selection

This enables the selection of the reception mode when receiving a NICAM signal. To let you
enjoy NICAM broadcasting, this LCD TV set can receive stereo, bilingual, and monaural
broadcasts of the NICAM system.
Stereo
When the LCD TV set is receiving a stereo broadcast, you can press
The mode changes between NICAM Stereo and Mono. When Mono is selected, the TV
sound is in Mono.
Bilingual
When the LCD TV set is receiving a bilingual programme, you can press
The mode changes as follows:
IGR (German stereo system) Broadcasts
This enables the selection of the reception mode when receiving a IGR signal. To let you enjoy
IGR broadcasting, this LCD TV set can receive stereo and bilingual broadcasts of IGR system.
Stereo
When the LCD TV set is receiving a stereo broadcast ,you press NICAM/A2.
The mode changes between FM Stereo and Mono When Mono is selected, the TV sound is
in Mono.
Bilingual
When the LCD TV set is receiving a bilingual programme, you press NICAM/A2.
The mode changes between FMA and FMB.
NICAM NICAM B Mono
23
NICAM/A2 .
NICAM/A2 ,