Use the remote control VOLUME
UP (A20) / DOWN (A7) buttons or
the TV set front panel VOLUME
UP / DOWN buttons.
Mute the sound by pressing the remote control SOUND
MUTE button (A2).
is returned after pressing the same button a second
If a sound related function is used (e.g. VOLUME,
then the MUTE will also be cancelled.
MONO FORCING, DUAL LANGUAGE
- If you are unable to get good sound quality for a
program due to poor reception, you can force a
change from stereo to mono transmission by
pressing the remote control MODE button (A14).
Then the program status display will indicate
"MONO" with a
- On the other hand, during a program with dual
language transmission, the MODE button
(A14) allows you to toggle between the first
and second language. The program status
display will indicate "DUAL 1" or "DUAL 2"
(plus NICAM according to the received signal).
- To return to initial state, press again the MODE
logo is displayed. The previous sound setting
T T V V / / A A V V
V V O O L L
C C H H