Push To Talk Calls; Log In To Push To Talk Service; Callback Requests - Nokia E61 User Manual

one callers or channel participants, or hide the
address from all callers.
Show my login status — Define whether your login
•
to the push to talk server is shown or hidden from
other users.
Connection settings
Select Options Settings Connection
> >
Define the following:
Domain — Enter the domain name obtained from
•
your service provider.
Access point name — Select the push to talk access
•
point.
Server address — Enter the IP address or domain
•
name of the push to talk server obtained from your
service provider.
User name — Enter your user name obtained from
•
your service provider.
PTT password — Enter a password, if required, to log
•
into the push to talk service. The password is
provided by the service provider.

Log in to push to talk service

If you have set Application start-up
settings, push to talk automatically logs in to the service
when started. If not, you must log in manually.
To log in to a push to talk service, select
Settings Connection settings, and enter your
>
name, PTT password, Domain,
Access point name. Select Options
48
When the
Beep once
you cannot make or receive push to talk calls.

Push to talk calls

Warning: Do not hold the device near your ear
settings.
when the loudspeaker is in use, because the volume
may be extremely loud.
Select Options
To make a push to talk call, select one or several
contacts from the list, and press the voice key.
Remember to hold the device in front of you during a
push to talk call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
To end the push to talk call, press the end key.
Answer or reject a call
When you receive a push to talk call, press the call key
to answer the call or the end key to dismiss the call.
on in User

Callback requests

Options
>
To send a callback request, select
User
contacts, scroll to the desired contact, and select
Server address, and
Options
>
Switch PTT on.
>
Ringing type setting of your device is set to
or Silent, or there is an ongoing phone call,
PTT contacts.
>
Options PTT
>
Send callback request.