Mitsubishi Electric PMFY-P VBM-E Installation Manual page 8

Air-conditioners for building application - indoor unit

Hide thumbs Also See for PMFY-P VBM-E:

Table of Contents

5. Installing the grille

Fig. 5-2

Fig. 5-3

Fig. 5-4

Fig. 5-5

A Points for securing the grille

B Points for securing the grille

C Indoor unit

D Ceiling surface

with the ceiling surface.

and that wiring connections and arrangements are complete.

5.3. Installing the grille (Fig. 5-4)

unit.

C Temporary holding tab

D Temporary holding tab

E Screw cover

the wall, and install the securing bolts 2

2 and securing screws 3 in the centre three

places.

2 in the four places at left and right.

panel, and between the front panel and the ceiling surface. If there are gaps, the

* Tighten the securing bolts 2 and securing screws 3 completely.

Caution:

When tightening the securing screws 2 and 3

[Fig. 5-5]

D Temporary securing tab

E Drainage pan

F Places for securing front grille

each

Table of Contents