Packet Data Access Points; Create Access Point Groups - Nokia E52 User Manual

To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are shown
and can be shared by a new access point. If you skip this
step, you are asked to select a connection method and to
define the settings needed.
To edit the settings of an access point, open one of the
access point groups, and select an access point. Follow the
instructions from your service provider.
Connection name
•
Data bearer — Select the data connection type.
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.

Create access point groups

Select Menu Ctrl. panel
>
Destinations.
Some applications allow you to use access point groups to
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
136
data access points to an internet access point group and
Access
— Enter a name for the connection.
or with a red *. Other fields can be left
Settings and
>
use the group for browsing the web. If you give the WLAN
point. The
access point the higher priority, the device connects to the
internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select
Manage
To add access points to an access point group, select the
group and
existing access point from another group, select the
group, scroll to an existing access point, and select
Options
To change the priority order of access points within a
group, scroll to an access point, and select
Organise

Packet data access points

Select Menu
Destinations
on the display. Or, open one of the access point groups,
and select an access point marked with
Use the instructions provided by your service provider to
Connection
edit the following:
>
Access point name
•
provided by your service provider.
User name
•
a data connection, and is usually provided by your
service provider.
Prompt password
•
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
New destination.
>
Options New access
>
Organise Copy to other
> >
Change priority.
>
Ctrl. panel Settings
> >
Access point, and follow the instructions
>
— The access point name is
— The user name may be needed to make
— If you want to set the device to
Options
>
point. To copy an
dest..
Options
>
and Connection
>
.