Call Settings; Network Settings - Nokia E52 User Manual

Network — Adjust the network settings.
•

Call settings

Select Menu Ctrl. panel
>
Call.
Select from the following:
Send my caller ID
•
the person you are calling.
Send my internet call ID
•
address to the person you are calling using an internet
call.
Call waiting — Set the device to notify you of incoming
•
calls while you are in a call (network service).
Internet call waiting
•
of new incoming internet calls while you are in a call.
Internet call alert
•
of incoming internet calls, select On. If you select Off,
you receive only a notification if you missed a call.
Reject call with message
•
text message to the caller.
Message text
•
is sent when you reject a call.
Own video in recvd. call
•
sending during a video call from your device.
Image in video call
•
not sent during a video call.
Automatic redial
•
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press the end key.
Show call duration
•
134
during the call.
Settings and
>
— Display your phone number to
— Display your internet call
— Set the device to notify you
— To set the device to notify you
— Reject a call, and send a
— Write the standard text message that
— Allow or deny video
— Display a still image if video is
— Set your device to make a
— Display the length of a call
Summary after call
•
the call.
Speed dialling
•
Anykey answer
•
Contact search
•
Phone
>
screen.
Line in use
•
displayed only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone
line you want to use for making calls and sending text
messages. Calls on both lines can be answered
irrespective of the selected line. If you select
have not subscribed to this network service, you are not
able to make calls. When line 2 is selected,
displayed in the home screen.
Line change
•
service), if supported by your SIM card. To change this
setting, you need the PIN2 code.

Network settings

Select Menu
Network.
To select the network mode, select
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
Tip: Selecting
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting
cause constant jumping between the two networks,
which also increases the demand on battery power.
— Display the length of a call after
— Activate speed dialling.
— Activate anykey answer.
— Activate contact search in the home
— This setting (network service) is
— Prevent line selection (network
Ctrl. panel Settings
> >
Network mode
UMTS enables faster data transfer,
Dual mode
Line 2 and
is
and Phone
>
and
may