Settings
Select
Menu
Ctrl. panel
>
You can define and modify various settings of your device.
Modifying these settings affects the operation of your
device across several applications.
Some settings may be preset for the device or sent to you
in a special message by your service provider. You may not
be able to change such settings.
Select the setting you want to edit to do the following:
• Switch between two values, such as on or off.
• Select a value from a list.
• Open a text editor to enter a value.
• Open a slider, and scroll left or right to adjust a value.
General settings
Select
Menu
Ctrl. panel
>
Select from the following:
Personalisation
•
personalise the device.
Date and time
•
Enhancement
•
accessories.
Sensor settings
•
Security
— Define the security settings.
•
Factory settings
•
130
device.
> Settings.
Settings
and General.
>
— Change the display settings, and
— Change the date and time.
— Define the settings for your
— Change the sensor settings.
— Restore the original settings of the
Positioning
— Define the positioning method and
•
server for GPS-based applications.
Personalisation settings
Select
Menu
Ctrl. panel
>
Personalisation.
Display settings
To define the level of light that the device needs before
switching on the backlight, select
sensor.
To change the text size, select
To adjust the length of time the display can be left idle
before the screen saver is activated, select
Power saver
time-out.
To select a welcome note or logo for the display, select
Display
Welcome note /
>
the default welcome note, enter your own text, or select
an image.
To set how quickly the display dims after the last keypress,
select
Display
Light
time-out.
>
Tone settings
Select
Menu
Ctrl. panel
>
Select
General
Personalisation
>
following:
Settings
and
General
>
Display
Light
>
Display
Font
size.
>
Display
>
logo. You can either choose
> Settings.
Tones
and from the
>
>