Nokia E52 User Manual page 129

browse web pages, you must first define internet access
points for these services. Virtual private network (VPN)
access points pair VPN policies with regular internet access
points to create secure connections.
Your service provider may preset some or all access points
for your device, and you may not be able to create, edit,
or remove them.
Select a destination and
following:
Connection name — Enter a name for the VPN access
•
point.
VPN policy — Select the VPN policy to combine with
•
the internet access point.
Internet access point
•
point with which to combine the VPN policy to create
secure connections for data transfer.
Proxy server address
•
address of the private network.
Proxy port number
•
Use access point — Select whether connections using
•
this access point are established automatically.
The settings available for editing may vary.
For the correct settings, contact your company's IT
department.
Use a VPN connection in an
application
You may have to prove your identity when you log on to
the enterprise network. Contact your company's IT
department for the credentials.
Options > Edit, and define the
— Select the internet access
— Enter the proxy server
— Enter the proxy port number.
To use a VPN connection in an application, the application
must be associated with a VPN access point.
Tip: You can configure the application's connection
setting to Always
VPN access point from a list of connections when a
connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your VPN
user name and passcode or password. If the SecurID
token has become out of synchronisation with the
clock of the ACE/Server, enter the next passcode. If you
are using certificate-based authentication, you may
have to enter the key store password.
ask, in which case you select the
129