Electrolux ESL 6552RO User Manual page 12

12 www.electrolux.com
7.1 Using the detergent
A
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance after a few minutes when:
• You have not closed the door to start
the programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The display shows the
number and the duration of the last
set programme.
3. Press the Program button again and
again to set a programme. If you want,
you can set the options applicable to
the programme. (If you want to set the
MyFavourite programme, press the
MyFavourite button).
• The display shows intermittently the
number and the duration of the pro-
gramme.
4. Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration.
B
30 A
20
+ -
C
1.
Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
Starting a programme with delay
start
1. Set the programme.
2. Press the Delay button again and
again until the display shows the delay
time you want to set (from 1 to 24
hours).
• The display shows intermittently the
programme number, the pro-
gramme duration and the delay
time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start.
• When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme again.
Press and hold buttons (4) and (5) at the
same time until the display shows the pro-
gramme P1.