Network - D-Link DIR-859 User Manual

Section 3 - Configuration
This section allows you to change the local network settings of the router and to configure the DHCP (Dynamic Host Control Protocol) settings. You
can enable the use of the DIR-859 as a DNS server. From the Settings menu, click Network.
Click Advanced Settings... to expand the list and see all of the available options.
LAN IP Address: Enter the LAN IP Address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask: Enter the Subnet Mask of the router. The default subnet mask is
255.255.255.0.
Management
The default address to access the router's configuration utility is
Link: http://dlinkrouter.local./ You may replace dlinkrouter with a name
of your choice by entering it into this field.
Local Domain Enter the Local Domain Name (optional).
Name:
Enable DNS If enabled, your computers will use the router for a DNS server.
Relay:
Disable to transfer the DNS server information from your ISP to your
computers.
Status: Enable or disable the DHCP server.
DHCP IP Enter the starting and ending IP addresses for the DHCP server's IP
Address Range:
assignment.
D-Link DIR-859 User Manual

Network

50