Auto Detection - D-Link DIR-859 User Manual

Section 3 - Configuration
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs require you to
change some settings on your side before your router can connect to the IPv6 Internet.
DNS Type: Select Obtain DNS server address or Use the following DNS.
Primary DNS If you selected Use the following DNS, enter the Primary DNS
Server address.
Server:
If you selected Use the following DNS, enter the Secondary DNS
Secondary DNS
Server: Server address.
Enable DHCP-PD: Enable or disable prefix delegation services.
LAN IPv6 Address: If you disabled DHCP-PD, enter the LAN (local) IPv6 address for
the router.
LAN IPv6 Link- Displays the router's LAN IPv6 Link-Local Address.
Local Address:
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Enable Automatic Enable or disable Automatic DHCP-PD in LAN services.
DHCP-PD in LAN:
Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful
Autoconfiguration
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-859 User Manual

Auto Detection

35