Error Messages - Brother MFC-240C User Manual

Error messages

Error Message Cause
The machine has a mechanical
Change Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
The machine has a mechanical
Clean Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Poor phone line quality caused a
Comm.Error
communication error.
The scanner cover is not closed
Cover is Open
completely.
Print data is left in the machine's
Data
memory. The USB cable was
Remaining
unplugged while the computer was
sending the data to the machine.
Print data is left in the machine's
memory.
The other person or other person's
Disconnected
fax machine stopped the call.
The document was not inserted or
Document Jam
fed properly, or the document
scanned from the ADF was too
long.
The print head is too warm.
High
Temperature
The machine has a mechanical
Init. Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
48
Action
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, before disconnecting the machine so
you will not lose any important messages. Then,
disconnect the machine from the power for
several minutes and then reconnect it.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, before disconnecting the machine so
you will not lose any important messages. Then,
disconnect the machine from the power for
several minutes and then reconnect it.
Try sending the fax again or try connecting the
machine to another telephone line. If the
problem continues, call the telephone company
and ask them to check your phone line.
Lift the scanner cover and then close it again.
Press Stop/Exit. The machine will cancel the job
and clear it from the memory. Try to print again.
Re-start printing from your computer.
Try to send or receive again.
See Document jam on page 51.
Allow the machine to cool down.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, before disconnecting the machine so
you will not lose any important messages. Then,
disconnect the machine from the power for
several minutes and then reconnect it.
B