Camera Housing - Internal Modules, Locations And Access - Bosch EX7 Installation Instructions Manual

1. CAMERA HOUSING – INTERNAL MODULES,
LOCATIONS and ACCESS
Step 1.1 - Remove the four security screws holding the
welded housing to the chassis assembly. Use the
supplied Allen key.
Step 1.2 - Carefully separate the housing from the chassis
assembly, ensuring the wires are not displaced
and the camera lens is not damaged.
Section 4 explains how to adjust the lens for tilt and
focus.
Camera Chassis Assembly –
Fixed Lens& Vari Focal "Auto-Iris" Lens
FIGURE 1 – 1
- 5 -