Lindemann 885 User Manual page 4

• Place your integrated amplifier on a stable support and use a spirit level to
make sure it is perfectly level. We recommend the use of a solidly
constructed hi-fi rack with adjustable shelves. In our experience, you will
achieve good results with racks using MDF shelves. Glass, metal or stone
being less suitable for use as hi-fi equipment supports. Avoid placing the
integrated amplifier close to loudspeakers or any other source of vibration.
The 885 will respond to these measures by performing at its best. Never stack
the 885 directly on other items of equipment. Vibrations from mains
transformers and electro-magnetic interference from other components can
have a negative impact on the integrated amplifier's sound quality. 800
series products are not suitable for installation in enclosures such as 19" racks
or cabinets. The on/off switch at the rear of the unit must always be
accessible.
• Take some time to organize your cabling. Try to keep power cables away
from interconnect and speaker cables. The included SYSCOM cable is used to
connect all other components to the 885. Warning: never connect the
amplifier to any non compatible equipment like telephones or computers.
Doing so might destroy all connected components.
• Make sure that the polarity of the mains wiring is the same for all system
components. You can achieve this by connecting all system components
through a single high quality mains distribution board. The lower the
contact resistance between the power outlets of your signal source and your
integrated amplifier, the less the audio signal will be polluted and the better
your hi-fi system will sound. Connecting your components with the correct
mains polarity is particularly important. Use a phase tester to determine
which pole is life. Mark the appropriate side.
• Cleaning and maintenance: To clean your integrated amplifier, use a soft
cloth. Use a proprietary glass cleaner to remove stubborn dirt from the front
panel. Do not use water! Never use solvents or white spirit. These will cause
irreparable damage to the surface of the unit.
885 Integrated Power Amplifier
5