Troubleshooting
The display is dark and the unit does not work:
The 885 is in standby mode. -> Press the POWER button.
•
The 885 is not connected to a power outlet, or the power switch (on the
•
rear panel) is in the off position. -> Plug the 885 into a power outlet and
switch the unit on.
The display illuminates but there is no sound:
The volume setting is too low. -> Turn up the volume.
•
There is no signal from the source component or the wrong source has
•
been selected.
The unit is in mute mode. -> Press the MUTE button.
•
The Speaker outputs are disabled. -> Press the SPEAKERS button.
•
The unit does not respond to the remote control.
The remote control battery is discharged or has been inserted incorrectly. -
•
> Change the battery.
The distance, or angle, between the remote control handset and the 885 is
•
too great.
The IR receiver on the 885 is obstructed. -> make sure that there is clear
•
line of sight between the remote control and the IR receiver.
885 Integrated Power Amplifier
18