Jilong Z-RAY III 500 SERIES Instruction Manual page 9

Assembled with
Air Pump
Caution: Do not over inflate, or use a high-pressure pump!
Please inflate the boat by number sequence. Do not over inflate.
Maximum pressure for air chambers
1 + 2 + 3
4 + 5
After inflating screw the valve cap A in clockwise direction by hand.
Deflating:
Remove the valve cap A, push down the deflation button C and turn
the valve by 90° until its is locked. Release the valve and the air will
flow out. If you want to stop the deflation, push down the deflation
button C and turn it by 90°. The deflation will stop when the valve is
released.
Assembly of the oar
Assemble the section of the oar by depressing the spring loaded pin
and inserting the sections of oar until the pins lock into their retaining
holes.
0.25 bar (3.63 PSI)
0.35 bar (5.08 PSI)
9
Air Pressure
Meter
Assembled with
Inflating Mouth B