Disassembly - Jilong Z-RAY III 500 SERIES Instruction Manual

Make sure the boat is completely clean and dry before storing,
otherwise the boat will be mouldy.
Do not use solvents to clean the boat, solvents may damage material
or plastic components in system.
Store all boat accessories in a dry storage location with ventilation.
Make sure that all parts are dry before storage.
You can store the boat inflated or deflated.
Choose a dry and cool place to store the boat.
Don't hang the boat up.
Don't place any heavy or sharp objects on it.
The boat is designed to be storable, seasonal boat. If you live in a
temperate area in which the boat will not be in use all year-round, it is
STRONGLY RECOMMENDED to
thoroughly, and store it in a protected area for the off-season. This will
help extend your boat and prevent a safety hazard from developing
while the boat is not in use.
Warning:
Certain household cleaning solvents, chemicals and other liquids
(such as battery acid, oil and gasoline) could damage the PVC fabric.
In the event of spill or mishandling, you should check for leaks and
inspect for structural integrity.

DISASSEMBLY

1. Remove all the accessories from the boat: fishing rod, oars.
2. Open all valves and deflate the boat completely.
3. Fold the boat (make sure that the boat is clean and dry. See the
above Maintenance & Storage chapter).
4. Put boat and air pump, oars into carry bag for storage.
deflate the boat and dry it
13