Cpe Consumption Management; How To Avoid Logging In Multiple Times; Consumption Management Notes - Huawei ORANGE 4G CPE Installation Manual

3
Dect phone should turn on, a point at which you should insert the RJ11 cable in to modem
and dect phone. You have access to making calls through the modem.

CPE Consumption Management

Orange internet offers come with data bundles, talk
time and SMS.
You can monitor data consumption by accessing the
CPE's Web Management platform and connecting to
the CPE's Web Management interface

Consumption Management Notes

• Fair Usage Policy: Your data will reset to its original
data bundle at end of the bill cycle and not
accumilate over bill cycles. For example if you
choose the 20GB data package, and use 10GB
in a bill cycle, in your next bill cycle your data will
reset to 20GB again NOT become an
accumulated 30GB.
• Reaching Data Cap: When you reach your data cap,
you will not be disconnected. Rather your browsing
speed will be significantly reduced until the time you
pay for your next bill cycle.

How to avoid logging in multiple times

• Due to power cuts or staying disconnected
to device for a long time, user may lose
connnectivity to CPE device.
• To avoid repetitively reconnecting to CPE
after every disconnection, you can set phone/
laptop/tablet to automatically connect to CPE
after it has been restarted.
• To do this simply: Enter device Web
Management Interface > Settings > Internet >
Connection Mode > Select "Always On"
• The Web Management Interface only shows data
consumed, NOT voice and SMS usage.
Voice and SMS usage will be reflected on your bill at
the end of the bill cycle.
Note
• If you face challenges with connectivity or staying
connected with device, turn device off, disconnect
the power supply and reconnect power and turn
device on.
• If the above procedure does not resolve the
connection problem contact your nearest Orange
shop or dial 123.