Connecting The Machine Safely - Brother ADS-2100e Product Safety Manual

Product Safety Guide

Connecting the machine safely

WARNING
There are high-voltage electrodes inside the machine. Before you access the inside of
the machine, (for routine maintenance, such as cleaning), make sure you have
unplugged the power cord from the electrical socket as well as any Ethernet
(ADS-2600We only) cables from the machine.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
DO NOT connect it to a DC power source or inverter. Doing this might cause an
electrical shock. If you are not sure what kind of power source you have, contact a
qualified electrician.
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause
an electrical shock or a fire.
DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on
the power cord. DO NOT place the machine where people can walk on the cord. Doing
this might cause an electrical shock or a fire.
Brother strongly recommends that you DO NOT use any type of extension cord.
Failure to observe these precautions could cause fire, electric shock, or damage to
the machine.
7