Allowed Number When Phone Locked; Change Lock Code; Call Restrictions - Nokia 2865 User Manual

9251716_2865_1_en_au_oth_v1.0.fm Page 58 Friday, September 1, 2006 10:18 PM
S e t t i n g s
If you select Lock now, you must enter
your lock code before the phone will
function normally. After the lock code
is accepted, your phone functions
normally.
Call not allowed appears if you attempt
to place a call while your phone is
locked.
To answer a call with phone lock on,
select Answer, or press the call key.
Allowed number when
phone locked
With phone lock on, the only outgoing
calls you can make are to the
emergency number programmed into
your phone and the numbers stored in
the Allowed no. when phone locked
location.
1. Select Menu > Settings
2. Enter the lock code, and select OK.
3. Select Allowed no. if lock active
Assign and one of the three slots.
4. Enter the phone number, or select
Search to retrieve the number from
the phone book; select OK.
To place a call to an allowed number
when the phone is locked, enter the
allowed number and press the call key.
58

Change lock code

When changing the lock code, avoid
using codes similar to emergency
numbers to prevent accidental dialling
of an emergency number.
If you enter an incorrect lock code five
times in a row, your phone may ask you
for the security code. By default, the
security code is the five-digit number,
12345.
To change the phone lock code, do the
following:
1. Select Menu >
2. Enter the current lock code,
and select OK.
3. Select Change lock
4. Enter the new lock code (only 4
characters), and select OK.
5. Enter the new lock code again for
> Security.
verification, and select OK.
When you change your lock code,
>
make sure to remember it. If necessary,
write it down and store it in a safe
place away from your phone.

Call restrictions

Call restrictions allows you to block or
permit numbers for incoming or
outgoing calls.
1. Select Menu >
2. Enter the lock code, and select OK.
Settings > Security.
code.
Settings > Security.